Asahi EAZY WELD aluminum rod AL450 5 pieces/set

[Features] ● Easy welding that does not require any equipment and has about 5 times the strength of soldering. ● Heat the welding base material to the working temperature of various rods (welding rods). ● You can get better results by checking the appropriate temperature with an infrared thermometer and working. ●Keep the base material at an appropriate rod melting temperature. ● Rub the rod against the base material and melt the rod at the temperature of the base material for repair work. ●Let it cool naturally for about 1 minute until the melted rod loses its luster.

[Applications] ●For welding and repairing aluminum.

[Specifications] - Tensile strength (PSI): 39000 - Compressive strength (PSI): 60000 - Shear strength (PSI): 34000 - Conductivity (%IACS): 24.9 - Type: for aluminum - Maximum operating temperature (°C): 391 ●Dimensions (mm): φ3 x 450mm ●Heat resistance temperature (℃): 379 to 391 ●Aluminum rod 5 pieces ●Type: for aluminum ●Dimensions (mm): φ3×450mm ●Maximum operating temperature (℃): 391

[Specification 2] - 5 aluminum rods/set - Size (wire diameter x length): φ3 x 450mm (5 x 5 x 350mm only for product number 1056)

[Material/Finish] ●Aluminum ●Zinc ●Copper ●Magnesium

[Set contents/accessories]
-

[Caution] ●Working with iron scraps that have been scraped off may cause corrosion. ●Be careful not to overheat the base material and melt it.If the thickness of aluminum exceeds 5 mm, use the included gas. Since it is very difficult to maintain the working temperature with a burner, use acetylene gas. If the temperature of the base material does not rise easily, place a refractory brick under the base material to increase efficiency. (Welding rods) should not be directly exposed to fire. If it is cooled rapidly with water, etc., its strength will be significantly reduced. If it is not hardened, it will splatter if it is blown with air, which is very dangerous. welding will not occur.