DAIDOHANT YAIBA IS Drill Screw Hex Head Fine Passivate 6.0x38

[Features] ● IS standard drill screw with tapping threads. ● Stable quality, outstanding workability, and excellent fastening force due to the design based on JIS standards. ●Because heat treatment and hardness are controlled according to the standard, breakage due to high hardness can be avoided. ● A thin steel plate can be attached to the C-shaped steel without a pilot hole.

[Applications] ● For joining thin iron plates and C-shaped steel.

[Specifications] - Nominal dimension (mm) D: 12.8 - Nominal dimension (mm) d: 6.0 - Nominal dimension (mm) L: 38 - Maximum applicable plate thickness (mm): 6.0 - Iron plate thickness (mm): 1.6 ~ 6.0 ● Brim diameter (mm): 12.8 ● Washer diameter (mm): 12.8 ● Head diameter (mm): 12.8 ● Nominal size (mm) B: 10 ● Nominal size (mm) H: 6.3 ● Opposite side (mm): 10 ● Head height (mm): 6.3 ● Under neck length (mm): 38 ● Drill tip (mm): 10 ● Nominal diameter: 6.0 mm ● Length: 38 mm ● Name: Hex drill screw with flange

[Specification 2] ● JIS (B 1124) certified factory product ● ISO9001, 14001 certified factory product ● Iron and Steel Federation standard Structural drill screw manufacturing certified factory product

[Material/Finish] Stainless steel (SUS410), fine passivate

[Set contents/accessories]
-

[Caution] ●Use a drill screw suitable for the fastener. ●Tighten with proper torque to avoid insufficient screwing, screw breakage, and head skipping. ●Install the drill screw perpendicularly to the fastener. ●Wear safety goggles when driving screws.