Asahi repair tape HT-50

[Features]●The repair tape is made from a special silicone material and does not use adhesive, so it leaves no traces. ●Follows irregular shapes of objects with 300% elongation. ●It insulates up to a high voltage of 8,000V and does not melt up to a high temperature of 260°C. ● After bonding, it is permanently impervious to air and water.

[Uses] ●For a wide range of applications such as air leaks, water leaks, steam leaks, insulation, corrosion prevention, and bundling.

[Specifications] ● Color: Black ● Width (mm): 50.8 ● Length (m): 11 ● Thickness (mm): 0.8 ● Operating temperature range (°C): -65°C to 260°C (intermittent use)

[Specification 2] ● Specific gravity: 1.2 +/- 0.03 ● Tension: 700 psi ● Extensibility: 300% ● Tear strength: 85 psi ● Adhesion strength: 2 lbs ● Water absorption: 3% or less ● Dielectric strength: 8000 V (0.5 mm thick Conversion) [General performance and features] Moisture resistance: Excellent UV resistance: Excellent Electrical insulation: Excellent Ozone resistance: Excellent Elasticity: Excellent Rust prevention: Excellent High temperature: Excellent Dissolution resistance: Good Flame resistance: Good Acid resistance: Good - acceptable Abrasion resistance: Good Oil resistance: Good - Acceptable ● Food Sanitation Act: Conforms to No. 370 ● MIL standard: Conforms to AA-59163A ● Operating temperature range: -45°C to 200°C (continuous)

[Material/Finish] ● Silicon

[Set contents/accessories]
-

[Caution] ●Before use, wipe off the dirt on the part to be wrapped as cleanly as possible. ●Only water and air can be used as a tape alone to prevent leaks. ●It is not recommended to rewrap the repair tape in places where pressure is applied, as it will reduce the strength. ●If the pressure is within 0.6Mpa, it is possible to stop leakage even under pressure. ●If the pressure is 0.6Mpa or more, reduce the pressure to within 0.6Mpa and wrap the cable 4 or 5 times to prevent leakage up to a maximum of 1Mpa.