KS Rebar Fixture KS Guts 32W (welded type) 334024 KS

[Features]
The separator can be installed without welding to the rebar.
The bag-drawing process provides outstanding strength.
Since it is fastened with bolts, it can be attached at any position on the rebar.

[Applications]
-

【specification】
Product name: KS Guts 32W
Thread size: M10
Thread diameter(mm):10
Length(mm):40
Allowable load *Parallel pull D13 (kN/kgf): 3.9/400
Allowable load *Parallel pull D16-32 (kN/kgf): 4.9/500
Allowable load *When pulling perpendicularly, D13 to 32 (kN/kgf): 3.9/400

[Specification 2]
Compatible rebar diameter: D13 to D32
Bolt flat diameter: 17mm
Bolt tightening torque: 10 to 15 Nm

[Material/Finish]
iron

[Set contents/accessories]
-

【Note】
Do not use in a direction that applies a load to the push bolt by pulling at right angles.
If you are going to weld the separator to the Guts body after installation, be sure to retighten the bolts. The initial torque will have decreased due to heat.