ATOMPAINT Water-based concrete floor top #21アメリカングレー 14L 00001-16142 ATOMPAINT

[Features]
The coating is hard, so it is resistant to wear and has dust-proofing properties.
This product is a major improvement over ATOMIX 's Floor Top #1400, with significantly improved resistance to contamination.
As it belongs to the "ATOM Floor Top Series", which is well-established for commercial use, the colour is unified, so you can rest assured when painting or repainting Floor Top #1400.
The coating is hard and resistant to wear, so you can reduce the frequency of repainting, which also leads to cost savings.
Even when painting at low temperatures, the drying stage is less affected by temperature and humidity, making it less likely to develop problems such as cracks.
Because it is water-based, there is no solvent smell and there is no risk of fire. It dries quickly, so you can walk on it in about 2 hours.

[Applications]
For concrete floors such as verandas, terraces, balconies, garages, entrances, warehouses, machine rooms, offices, etc.

【specification】
Color: American Gray
Capacity(L):14
Drying time: Summer/30 to 60 minutes, Winter/2 to 3 hours
Dry to touch time: Summer/30 to 60 minutes, Winter/2 to 3 hours
Recoating time: 3 hours or more (6 hours or more in winter)
Number of coats: 2
Coating area (m2): 40-60 (equivalent to 24-36 tatami mats)
Curing time: 3 hours or more (6 hours or more in winter)
Semi-curing drying time: 3 hours or more (6 hours or more in winter)
Capacity (kg): 3 hours or more (6 hours or more in winter)

[Specification 2]
Paint area: 40-60 m2 (equivalent to approximately 24-36 tatami mats)
Liquid type: Water-based, glossy
Diluent: Usually not required. When concentrated, use tap water up to 5%
Building Standards Act compliant product: F☆☆☆☆

[Material/Finish]
Synthetic resin (acrylic)

[Set contents/accessories]
-

【Note】
New concrete or mortar surfaces should be painted at least four weeks after pouring.
Always apply a water-based primer to unpainted concrete.
Heavy objects should be released after 24 hours.
It cannot be applied to waterproofed surfaces such as asphalt waterproofing, sheet waterproofing, FRP waterproofing, etc.
Avoid painting when the temperature is below 5°C or the humidity is above 85%.