アトムペイント　水性ハードライン　４Ｋｇ　黄　 00001-12118 ATOMPAINT

[Features]
It dries quickly, and vehicles can pass over the area 30 minutes after painting (at a temperature of 23°C and humidity of 50%).
It is a water-based type that does not have the odor that is typical of solvent-based paints, and can be easily applied with a roller without worrying about fire.
It is resistant to cracking and peeling and can withstand the heavy pressure of an automobile and wear caused by the vehicle for a long period of time.
Nighttime reflectivity can be improved by using the "Hardline reflective beads" sold separately.

[Applications]
For use as parking lot dividing lines, traffic dividing lines within factory premises, and inventory dividing lines in warehouses and stores.

【specification】
Color: Yellow
Drying time: Summer: approx. 0.5 hours, Winter: approx. 1 hour
Dry to touch time: Summer: approx. 0.5 hours, Winter: approx. 1 hour
Time required for recoating: Summer: approx. 0.5 hour, Winter: approx. 1 hour
Number of coats: 2
Application area (m2): 40-90m with a 15cm wide line (2 coats)
Semi-curing drying time: Summer: approx. 0.5 hours, Winter: approx. 1 hour
Type: Acrylic resin
Capacity(kg):4
Standard application amount: 40-90m/2 coats on a 15cm wide line

[Specification 2]
Water-based marking paint
Formaldehyde emission F☆☆☆☆
Standard application amount: 40 to 90 m on a 15 cm wide line (2 coats)

[Material/Finish]
acrylic resin

[Set contents/accessories]
-

【Note】
When painting, we recommend using a roller with long bristles of 20mm or more.
Precautions for newly constructed asphalt surfaces: If a lot of oil is used during compaction, the paint will not adhere well, so remove it with a neutral detergent, rinse with water, and then dry completely.
It cannot be painted over two-component epoxy or acrylic urethane paints.
Because it is matte, it is not suitable for indoor areas that are prone to getting dirty.
For concrete surfaces, use water-based Best Sealer K or ATOM water-based primer ECO.