ATOMPAINT water-based anti-corrosion, for iron parts 1.6L light gray

[Features]
●Anti-corrosion and overcoating can be done in one time. (except matte gray)
Long-term durability is achieved through excellent rust prevention properties that can be applied directly over rust and the combination of HALS (anti-ultraviolet degradation agents).
●Using epoxy-modified resin, it can be applied not only to iron but also to aluminum building materials and stainless steel.

[Use]
For steel frames, iron doors, gates, fences, storerooms, shutters, tin (excluding roofs), aluminum building materials, and stainless steel.

【specification】
Color: light gray
-Capacity (L): 1.6
Application area ([[M2]]): Approximately 10 to 15 (approximately 8 tatami mats)
Touch dry time: Summer/about 1, winter/about 2-3
Overcoating time: Summer/3 or more, Winter/6 or more
Overcoating time: Summer/3 or more, Winter/6 or more

[Specification 2]
Painted area (m2): 10-15 (approximately 8 tatami mats)
Gender: Water-based glossy (excluding matte gray)
● Diluent: Usually not required ・When it is thick, use tap water within 5%
Number of coats: 1 coat (2 coats over rust)

[Material/Finish]
●Synthetic resin (acrylic, epoxy), pigment, water

[Set contents/accessories]
-

【Note】
●This paint is also used as a topcoat, so please do not topcoat with other paint.
●If you want to paint with other paint, please paint matte gray color as a primer and paint over it with your favorite water-based paint or oil-based paint (excluding lacquer paint).
●Remove rust that forms on the surface of the iron part like a bump that can be easily removed by touching it.
●Avoid painting when the temperature is below 5°C or the humidity is above 85%.
● Galvanized roofs cannot be painted because the material shrinks significantly.