[Features]●The repair tape is made from a special silicone material and does not use adhesive, so it does not leave any marks. ●Follows irregular shapes of objects with 300% elongation. ●It insulates up to a high voltage of 8,000V and does not melt up to a high temperature of 260°C. ● After bonding, it is permanently impervious to air and water.
[Uses] ●For a wide range of applications such as air leaks, water leaks, steam leaks, insulation, corrosion prevention, and bundling.
[Specifications] ● Color: Black ● Width (mm): 25.4 ● Length (m): 3 ● Thickness (mm): 0.5 ● Operating temperature range (°C): -65°C to 260°C (intermittent use)
[Specification 2] ● Specific gravity: 1.2 +/- 0.03 ● Tension: 700 psi ● Extensibility: 300% ● Tear strength: 85 psi ● Adhesion strength: 2 lbs ● Water absorption: 3% or less ● Dielectric strength: 8000 V (0.5 mm thick conversion) ● MIL standard: conforms to AA-59163A ● Food Sanitation Act: conforms to No. 370 ● Operating temperature range: -45°C to 200°C (continuous)
[Material/Finish] ● Silicon
[Set contents/accessories] -
[Caution] ●Before use, wipe off the dirt on the part to be wrapped as cleanly as possible. ●Only water and air can be used as a tape alone to prevent leaks. ●It is not recommended to rewrap the repair tape in places where pressure is applied, as it will reduce the strength. ●If the pressure is within 0.6Mpa, it is possible to stop leakage even under pressure. ●If the pressure is 0.6Mpa or more, reduce the pressure to 0.6Mpa or less, and then strongly wrap the cable 4 to 5 times to prevent leakage up to 1Mpa.
