[Features]●Affix the repair putty to the base before applying the repair tape, then wrap the repair tape over it. ●It can also be used as a mold for molding parts.
[Uses] ● For a wide range of applications such as air leaks, water leaks, steam leaks, insulation, leak prevention, corrosion prevention, and bundling.
[Specifications] ●Color: Red ●Width (mm): 19 ●Length (m): 0.14 ●Thickness (mm): 9.5 ●Heat resistance temperature (°C): 260 ●Capacity (ml): 40 ●Curing time: none -Sheet size (mm): width 19mm x length 140mm x thickness 9.5mm
[Specification 2] ● Specific gravity: 1.2 +/- 0.03 ● Tension: 700 psi ● Extensibility: 300% ● Tear strength: 85 psi ● Adhesion strength: 2 lbs ● Water absorption: 3% or less ● Dielectric strength: 8000 V (0.5 mm thick conversion) Compliant with Food Sanitation Act No. 370 Operating temperature range: -45°C to 200°C (continuous)
[Material/Finish] ● Silicon
[Set contents/accessories] -
[Caution] ●Before use, wipe off the dirt on the part to be wrapped as cleanly as possible. ●Be sure to use together with repair tape. ●Leakage can be stopped even under pressure within 0.6Mpa. ●If the pressure is higher than that, reduce the pressure to within 0.6Mpa, and then strongly wrap the cable 4-5 times to prevent leakage up to 1Mpa.
