SANWA true RMS compatible digital multimeter PC connection type

[Features]
●True rms value can be measured (AC only).
●Dual display of voltage and frequency is possible.
●Minimum resolution is 0.01mV (ACV/DCV only).
●Equipped with capture function and MAX/MIN recording function.
● The liquid crystal part is equipped with a backlight.
●Data can be transferred to a PC using the separately sold dedicated software and an optical link USB cable.
●Compliant with the new IEC.

[Use]
●For research and development.
●For electronic work.
●For electrical work and equipment maintenance.

【specification】
- DC voltage (V): 1000
- AC voltage (V): 1000
- DC current (A): 10
- Alternating current (A): 10
- Resistance (Ω): 50M
●Capacitor: 25mF

[Specification 2]
● Maximum display: 500000 counts
-Width x depth x height: 86 x 52 x 184mm
Battery life: 100 hours
●Detection method: true rms rectification (RMS)
-Power supply: 9V alkaline battery (6LF22) x 1 (included)

[Material/Finish]
-

[Set contents/accessories]
●Instruction manual
●Test lead TL-23a
●Holster H-700
● K-type thermocouple temperature sensor K-250PC

【Note】
● Do not use if the main unit or test leads are damaged.
● Do not hold the test pin side of the test probe by its collar during measurement.
●Connect the ground side (black test lead) first, and then connect the energized side (red test lead). When disconnecting, disconnect the energized side first.
●Do not switch to other functions or ranges or replace test lead plugs with other measurement terminals during measurement.
●Use a fuse of the specified shape and rating.