YODOGAWA air blow dedicated workbench YMS series (compact specification) Single-phase 100V (0.4kW)

[Features]
●Since it is equipped with casters, it can be easily set next to the machine tool, making air blow work more efficient.
●Even if it gets wet, there is little deterioration in performance, and it has a built-in special filter that can be refreshed.
●Equipped with a liquid recovery tank with a drain plug at the bottom of the main unit.
●The main parts and parts of the main body have undergone simple anti-corrosion treatment, and the rubber part is oil-resistant.
●This product complies with the RoHS Directive.
● Equipped with a high-performance non-woven fabric filter coated with Teflon for oil and wet dust that does not easily clog (collection efficiency of 5 μm or more: 99.99% collection). The filter can be reused after being washed with water or brushed to save energy.
● Short-time maintenance is realized by a simple UNIT method that does not require tools.
●It is possible to make a special order and support different voltages from 1 unit.
●By attaching the optional automatic air blow UNIT, automatic air blow work is also possible.

[Use]
●For collecting cutting oil and cutting dust generated during air blowing on the machine tool side.
●Recovers fundamentally the mist scattered during air blowing, which is the cause of the oil mist that causes dirt in the factory.

【specification】
Power supply (V): Single phase 100
- Output (kW): 0.4
-Dust collection capacity (L): 23
Air volume ([[M3]]/min) (50/60Hz): 15.0/17.0
●Noise level (dB(A)) (50/60Hz): 71/74
● Standard power consumption rate: 10.8 yen/h
●Frequency (Hz): 50/60Hz
●Dust removal method:-
●Dust removal method:-
- Static pressure (kPa) (50/60Hz): 1.18/1.67
-Power cord length (m): 2 with plug
- Work space dimensions (mm) (width x depth x height): 560 x 500 x 340

[Specification 2]
● Front openable hood
●50/60Hz dual use
● Supports different voltages from one unit
●Work surface control wind speed (m/s) (50/60Hz) 2.1/2.4

[Material/Finish]
Body: Made of iron plate In-house designed motor
- Filter material: Polyester molded non-woven fabric (Teflon impregnated)

[Set contents/accessories]
●None

【Note】
Separate fare
●Do not suck flammable, explosive, flammable, or emergency items. Cutting oil with a flash point of 120°C or less and cleaning liquid with a flash point of 135°C or less cannot be sucked.
●It cannot be used even if it turns into a dangerous substance due to mixing of work and cutting oil or mixing of multiple liquids. Please contact us if the cutting oil may go rancid.
● When ordering, it is mandatory to fill out the manufacturer's specified "Suction oil type confirmation sheet". We ask for your cooperation in order to use it safely.