YODOGAWA Welding fume dust collector (small differential pressure sensing type pulse jet dust removal) SET-TEC three-phase 200V (1.5kW) 50Hz

[Features]
The fine differential pressure sensor type pulse jet dust removal always demonstrates the optimum performance.
A dust collector developed exclusively for welding fumes. Equipped with a pulse jet dust removal function, it always exhibits optimum performance. Adopting a special metal porous baffle, it is possible to sediment spatters and sparks and suck them safely.
It is a fully automatic dust collector that continuously detects clogging of the filter with a fine differential pressure sensor and automatically performs pulse jet dust removal with a computer. A dedicated touch panel monitor that shows the status of the dust collector makes it possible to check whether it is always operating under optimal conditions.
It is a dedicated machine for 50Hz and 60Hz.
It is a RoHS directive compliant product.
Equipped with a high-performance non-woven fabric filter developed for collecting welding fumes with a very wide filtration area, it exhibits optimal dust collection capacity.
Short maintenance time has been achieved with a simple UNIT method that does not require tools.
Custom orders and different voltages are available from 1 unit.

[Use]
For suction of spatter (sparks) and welding fumes generated during welding.

【specification】
Power supply (V): Three-phase 200
Output (kW): 1.5
Dust collection capacity (L): 27
Air volume ([[M3]]/min) (50/60Hz): 20/-
Noise level (dB(A)) (50/60Hz): 67/-
Suction port diameter (mm): 150
Standard power consumption rate: 20.25 yen/h
Power cord length (m): 3 (tip crimp terminal only)
Maximum static pressure (kPa) (50/60Hz): 2.35/2.75
Dust removal method: Pulse jet type (small differential pressure sensing type)

[Specification 2]
Uses special metal porous baffle
Equipped with a pretreatment box to minimize the suction of spatter and sparks to the main body.
Number of installed filters (books): 4
Compressed air pressure (Mpa): 0.49 to 0.69
Supports different voltages from one unit

[Material/Finish]
Body: Made of iron plate In-house designed motor
Filter material: Polyester molded non-woven fabric (Teflon laminate)

[Set contents/accessories]
-

【Note】
-