[Features] Adopting a special metal porous baffle, it is possible to sediment spatters and sparks and suck them safely. The timer-type pulse jet dust removal always provides optimum performance. The main unit's pulse jet dust removal is designed to work effectively, and a filter that can handle various types of fume collection is used. No tools are required, and a simple UNIT system enables short-time maintenance. It is a RoHS directive compliant product. Equipped with a high-performance non-woven fabric filter developed for collecting welding fumes with a very wide filtration area, it exhibits optimal dust collection capacity. Short maintenance time has been achieved with a simple UNIT method that does not require tools. Custom orders and different voltages are available from 1 unit.
[Use] For suction of spatter (sparks) and welding fumes generated during welding. For various welding work sites.
【specification】 Power supply (V): Three-phase 200 Output (kW): 1.5 Dust collection capacity (L): 27 Air volume ([[M3]]/min) (50/60Hz): 20/- Noise level (dB(A)) (50/60Hz): 67/- Suction port diameter (mm): 150 Standard power consumption rate: 20.25 yen/h Power cord length (m): 3 (tip crimp terminal only) Maximum static pressure (kPa) (50/60Hz): 2.35/2.75 Dust removal method: Pulse jet type (timer type)
[Specification 2] Uses special metal porous baffle Filter type: Molded non-woven cylindrical filter (for fume) Supports different voltages from one unit Compressed air pressure used: 0.49 to 0.69 MPa Power supply: Three-phase 200V
[Material/Finish] Body: Made of iron plate In-house designed motor Filter material: Polyester molded non-woven fabric (Teflon laminate)
