AMANO pulse jet dust collector 1.35KW

[Features]
● Energy-saving and space-saving pulse jet dust collector PiF series.
●Equipped with an inverter as standard equipment.
●Remote control is possible.
● Downward air flow inside the main unit. Reduces dust re-adhesion on the filter surface due to soaring dust.
●The degree of filter clogging is displayed on the LCD with AICO or numerical values.

[Use]
●Dry dust collection.
●For cutting work, cutting work, polishing work, cutting work, sanding work, drill press work, powder feeding work, electronic parts processing, metal processing, etc.

【specification】
Power supply (V): three-phase 200
- Output (kW): 1.35
-Dust collection capacity (L): 22.5
Air volume ([[M3]]/min) (50/60Hz): 30/30 (maximum air volume)
●Noise level (dB(A)) (50/60Hz): 67±2 or less/67±2 or less
● Standard power consumption rate: 18.23 yen/h
-Suction port diameter (mm): φ150
- Static pressure (kPa): 2.65 (maximum static pressure)
Dust removal method: pulse jet
-Power cord length (m): 3 (4 cores, no plug)
●Automatic pulse jet

[Specification 2]
●50/60Hz dual use
Dust collection method: molded cartridge filter
● Supports different voltages from one unit

[Material/Finish]
-Body: Iron
●Cartridge filter: polyester spunbond

[Set contents/accessories]
-

【Note】
●Before using the product, read the instruction manual carefully and use it correctly.
●The product cannot be installed in hazardous locations as stipulated by laws and regulations.
●This machine is not explosion-proof.