YODOGAWA Pulse jet dust removal (low differential pressure sensing) type dust collector PET-TEC series 3-phase 200V (2.2kW/IE3 motor) 60Hz

[Features]
● Equipped with a proprietary IE3 premium efficiency (top runner) motor. It is an energy-saving, totally enclosed fan-cooled motor that supports long-term continuous operation and load fluctuations.
A dust collector with a pulse jet dust removal function that uses high-pressure air exclusively for dry dust. It is a fully automatic dust collector that continuously detects clogging of the filter with a fine differential pressure sensor and performs pulse jet dust removal automatically by a computer.
●It is possible to check whether the dust collector is always operating in the optimum condition with a dedicated touch panel monitor that shows the status of the dust collector.
●It is a dedicated machine for 50Hz and 60Hz.
●This product complies with the RoHS Directive.
●It has a very wide filtration area and provides the ideal pulse jet dust prevention effect with a high-performance non-woven filter exclusively for pulse jet dust removal (collection efficiency of 5 μm or more: 99.99% collection). The filter can be reused after being washed with water or brushed to save energy.
● Short-time maintenance is realized by a simple UNIT method that does not require tools.
●It is possible to make a special order and support different voltages from 1 unit.

[Use]
● For connection to various industrial machines and powder processing equipment, as well as dust collection for various polishing work, powder transportation and bagging work.
●For long-term continuous operation, this machine with a pulse jet dust removal function that can maintain high dust collection performance is most suitable.

【specification】
Power supply (V): three-phase 200
- Output (kW): 2.2
-Dust collection capacity (L): 36
Air volume ([[M3]]/min) (50/60Hz): -/40
●Noise level (dB(A)) (50/60Hz): -/71
● Standard power consumption rate: 29.7 yen/h
-Frequency (Hz): 60
- Suction port diameter (mm): 175
● Static pressure (kPa): 2.75/3.24
Dust removal method: Pulse jet type (low differential pressure sensing type)
-Power cord length (m): 3 (tip crimp terminal only)
-Power cord length (m): 3 (tip crimp terminal only)
Maximum static pressure (kPa) (50/60Hz): 2.75/3.24

[Specification 2]
For dry dust only
● Filter collection efficiency: 99.99% over 5 μm
- Number of installed filters (books): 6
● Compressed air pressure (Mpa): 0.49 to 0.69
● Supports different voltages from one unit
Equipped with IE3 motor

[Material/Finish]
Body: Made of iron plate In-house designed motor
● Filter material: polyester molded non-woven fabric

[Set contents/accessories]
●None

【Note】
Separate fare
●Do not suck flammable, explosive, flammable, or emergency items. In addition, wet dust, liquid mist, and liquid objects cannot be sucked.
●If you use one unit to suck more than one type of dust, use it at your own risk.
●Please specify 50Hz or 60Hz when ordering.