Dust collector for KOTOHIRA workbench Small type

[Features]
●Attach it to your current workbench to collect fine dust from grinding with a grinder.
●Ignition due to sparks and static electricity is prevented by a collision plate and a ceramic filter.
● Factory air can be connected to remove dust from the secondary filter (the primary filter can also be washed with water or cleaned with factory air).
●The single-phase 100V specification makes it easy to secure a power supply, and the power consumption is 250W, which is energy-saving.
●The duct connection specification can be changed as an option.

[Use]
●For collecting dust from polishing.

【specification】
Power supply (V): Single phase 100
- Output (kW): 0.25
-Dust collection capacity (L): 14
Air volume ([[M3]]/min) (50/60Hz): 15
●Noise level (dB(A)) (50/60Hz): 74
● Standard power consumption rate: 6.75 yen/h
- Suction port (mm) width x height: 556 x 500
●Frequency (Hz): 50/60Hz
● Filter: Primary: Ceramic, Secondary: Square dust collection
Motor type: Large DC blower fan motor
- Suction port diameter (mm): -
- Static pressure (kPa): -
- Body dimensions (mm) height: 1280
-Power cord length (m): 2.5
- Body dimensions (mm) depth: 450
- Body dimensions (mm) width: 600
- Noise level (dB): 74
- Noise level (dB (A)): 74
● Power cord plug presence or absence: Yes

[Specification 2]
●50/60Hz dual use
-Primary filter: Ceramic filter (1 piece)
-Secondary filter: Square dust collection filter (1 piece)

[Material/Finish]
●Steel (powder coating)

[Set contents/accessories]
-

【Note】
-