AMANO cyclone built-in dust collector 0.75KW

[Features]
●The built-in cyclone provides excellent dust collection performance.
●Dust disposal is easy.
●Compact design that integrates cyclone and dust collector.

[Use]
●Dry dust collection.
●For cutting work, cutting work, polishing work, cutting work, sanding work, bagging work, drill press work, powder input work, electronic parts processing, etc.

【specification】
Power supply (V): three-phase 200
- Output (kW): 0.75
-Dust collection capacity (L): 20
Air volume ([[M3]]/min) (50/60Hz): 9.0/11.0 (maximum air volume)
●Noise level (dB(A)) (50/60Hz): 67±2 or less
● Standard power consumption rate: 10.13 yen/h
-Frequency (Hz): 50/60 common
- Suction port diameter (mm): φ125
Static pressure (kPa): (50Hz) 2.0 / (60Hz) 2.8 (maximum static pressure)
Dust removal method: manual
-Power cord length (m): 3 (4 cores, no plug)
Air volume (50/60Hz) ([[M3]]/min): 6/7.5
●Manual type

[Specification 2]
●IE3 premium efficiency motor type
●50/60Hz dual use
● Supports different voltages from one unit

[Material/Finish]
-Body: Iron
●Cartridge filter: polyester spunbond

[Set contents/accessories]
-

【Note】
●Pail cans are sold separately.
●The product cannot be installed in hazardous locations as stipulated by laws and regulations.
●This machine is intended for collecting general dust that is not likely to cause dust explosion or fire.
●This machine is not explosion-proof.