KAMAKURA SEISAKUSHO Co.,Ltd. transfer fan with silencer Long reach model 3-phase 200V

[Features]
● Easy to install, ideal for places where duct installation is difficult.
●We supply wind superior in directivity to exact position and place.
●Blowout angle can be changed by 30 degrees up and down from the horizontal, and 45 degrees left and right from the front.
●Two series with fan diameter of 300mm and 400mm.
●Two types of single-phase 100V and three-phase 200V are available.
●The size and air volume can be selected according to the customer's needs.

[Use]
●For heat countermeasures (hot air discharge), cold air transfer, fume countermeasures, dew condensation countermeasures, etc.

【specification】
Power supply (V): three-phase 200
●Noise level (dB(A)) (50/60Hz): 71/74
- Splash diameter (mm): 300 x 2
●Type: With silencer
- Output (kW) (50/60Hz): 0.8 (0.4 x 2)
Power consumption (kW) (50/60Hz): 0.61/0.91
●Standard power consumption rate (50Hz): 8.24 yen/h
●Standard power consumption rate (60Hz): 12.29 yen/h
Air volume ([[M3]]/min) (50/60Hz): 44/52
- Number of poles (P): 2
Air volume ([[M3]]/min) (50/60Hz): 44/52
Power consumption (kW) (50/60Hz): 0.61/0.91
●Standard power consumption rate (50Hz): 8.24 yen/h
- Output (kW) (50/60Hz): 0.8 (0.4 x 2)
●Standard power consumption rate (60Hz): 12.29 yen/h
●Type: With silencer

[Specification 2]
●Power cord: 1.4m
Equipped with dual fans for Kosoku blowing
●Angle can be adjusted
- Splash diameter: 300mm
● Supports different voltages from one unit

[Material/Finish]
-

[Set contents/accessories]
-

【Note】
● A model with a large air volume is suitable for long-distance ventilation such as push-pull ventilation.
● A model with a small air volume is suitable for dealing with the heat, which blows air directly on the worker.