Might TIG Welder

[Features]
●Can be used for both AC and DC.
●It is a lightweight and compact machine.
● High-quality welding is possible with low-speed and Kosoku pulses.
● High-quality aluminum welding is possible by selecting 3 patterns of AC output waveform.
Easy setting operation with digital display
● Wide voltage function
●100V/200V combined use (both DC/AC)
●Aluminum TIG is also possible with AC output

[Use]
● For welding all metals such as aluminum, iron, stainless steel, copper, etc.
Ideal for on-site work welding

【specification】
- Welding rod diameter (mm): 1.6 to 4.0
Rated input (kVA) TIG DC: 3.6 (100V)/5.0 (200V)
Input voltage (V): Single phase 100/200
- Rated input (kVA) (100V/200V) TIG DC: 3.6/5.0
- Rated input (kVA) TIG AC: 3.6 (100V)/5.0 (200V)
●Rated input (kVA) (100V/200V) TIG AC: 3.6/5.0
● Rated input (kVA) (100V/200V) hand welding: 4.3/7.4
- Rated input (kVA) hand welding: 4.3 (100V) / 7.4 (200V)
●Current range (A) (100V/200V) TIG direct current: 5 to 160/5 to 200
●Current range (A) TIG direct current: 5 to 160 (100V) / 5 to 200 (200V)
●Current range (A) (100V/200V) Hand welding: 5 to 130/5 to 200
●Current range (A) TIG AC: 5 to 160 (100V) / 5 to 200 (200V)
● Current range (A) hand rod welding: 5 to 130 (100 V) / 5 to 200 (200 V)
● Usage rate (%): 40
●Current range (A) (100V/200V) TIG AC: 5 to 160/5 to 200
- Depth (mm): 510
- Height (mm): 340
- Width (mm): 190
●Rated input (kVA)) (100V/200V) Hand welding

[Specification 2]
High frequency start TIG
● Touch start TIG
●Manual arc welding
For both AC and DC
High frequency TIG/touch start TIG
●Initial/crater current adjustment
● Up/down slope setting
●Pulse function (current/frequency setting)
●Hand arc welding (HOT start arc force function)

[Material/Finish]
-

[Set contents/accessories]
●200A TIG torch 8m (with torch cover)
● Torch switch 8m
● Earth cable 5m
●Gas hose 3m
Argon regulator
●Alumina nozzle (#5×1, #6×1, #7×1)
●Collet body 2.4mm
●Collet 2.4mm
- Torch cap (S x 1, L x 1)
●Tungsten electrode rod φ2.4mm×2

【Note】
-