Tsurumi Sweep pump for residual water absorption and drainage 50Hz

[Features]
●The check valve of the new siphon breaker mechanism prevents backflow of pumped water and sealing water leakage due to siphon phenomenon when the pump is stopped.
●The check valve of the new siphon breaker mechanism prevents backflow of pumped water and sealing water leakage due to siphon phenomenon when the pump is stopped.
●We have achieved weight reduction by adopting aluminum die-casting and synthetic rubber for the main parts.
● Hose with metal fittings on both sides (suction port side, pump side) for easy connection.
●By covering the bottom plate with synthetic rubber, it absorbs shock to the main unit and prevents damage to the floor.
● Convex bottom shape for easy removal with a plastic HAMMER CASTER during maintenance.

[Use]
●For residual water absorption and drainage.
●For factory facility drainage and residual water drainage.
●For draining stagnant water from slabs and floors at various construction sites.

【specification】
Discharge rate (L/min): 50 (maximum)
-Total lift (m): 6.9 (maximum)
-Frequency (Hz): 50
- Caliber (mm): 25 × 25
Power supply (V): Single phase 100
● Current (A): 6.8
- Output (kW): 0.48
● Usable water quality: Sewage, residual water, pooled water
-Power cord length (m): 5
- Width (mm): 265
- Total length (mm): 300
-Overall height (mm): 307
● Control part number: LSP1.4S-52

[Specification 2]
● Non-automatic operation type
●Power cord length: 5m
- Suction hose: 5m
● Supports different voltages from one unit
● Supports different voltages from one unit

[Material/Finish]
●
Impeller: Water-resistant special urethane rubber
● Casing: SBR + SUS304
- Suction cover: SUS304
- Bottom plate: ADC12 + SBR
●
- Suction port: ADC12
●Discharge port with handle: ADC12
- Out cover: SPCC
- Shaft seal (mechanical seal): SiC

[Set contents/accessories]
●Cabtyre cable
- Suction hose (5m with metal fittings)
● Suction attachment (with liquid level detection electrode)
-φ25mm union hose coupling (for outlet)

【Note】
● Be sure to fill the priming water before operation. (about 1.8l)