[Features] ● Heat the welding base material to the working temperature of various rods (welding rods). ● You can get better results by checking the appropriate temperature with an infrared thermometer and working. ●Keep the base material at an appropriate rod melting temperature. ● Rub the rod against the base material and melt the rod at the temperature of the base material for repair work. ●Let it cool naturally for about 1 minute until the melted rod loses its luster. ●It is a simple welding kit that does not require equipment and can work quickly anywhere as long as you have a gas burner.
[Use] ●For welding and repairing aluminum.
【specification】 - Tensile strength (PSI): 39000 -Compressive strength (PSI): 60000 - Shear strength (PSI): 34000 Conductivity (%IACS): 24.9 - Maximum operating temperature (°C): 391 -Dimensions (mm): φ3 x 450mm ● 2 rods for aluminum - Maximum operating temperature (°C): 391 -Dimensions (mm): φ3 x 450mm
[Specification 2] ●Simple welding kit Aluminum kit EWK-AL - 2 aluminum rods + 1 dedicated burner + 1 dedicated cylinder + 1 wire brush Approximately 5 times stronger than soldering
【Note】 ●Working with iron scraps that have been scraped off may cause corrosion. ●Be careful not to melt the base material by heating it too much. ● Do not apply fire directly to the rod (welding rod). ●If it is rapidly cooled with water, etc., its strength will drop significantly.It is very dangerous if it is blown out with air when it is not hardened.If it is overheated, it will repel and will not weld. ●If the thickness of aluminum exceeds 5mm, it is very difficult to secure the working temperature with the attached gas burner, so please use acetylene gas.If the base material temperature does not rise easily, place a refractory brick under the base material. Efficiency will increase if you work with .
