[Features] ●Contains 96% zinc powder and exhibits excellent long-term rust prevention. ●Since it uses epoxy resin, it adheres well to the base material, and can be overcoated, increasing workability. ●It is a 1-liquid type that does not drip when painting and has a short drying time. ● STANDARD type with gray finish. ●A small amount type that is ideal for partial repairs, and comes with a convenient brush that can be used immediately on site.
[Use] ●Weld marks, cut surfaces, drilling of galvanized steel, zinc sagging, scratches, non-plated areas, etc. ●Alternative to zinc plating for large structures that do not fit in a plating bath or for thin objects that are subject to heat distortion. ● Life-prolonging repair coating of galvanized steel towers, bridges, electrical equipment, etc. that have begun to rust due to aging. ●For long-term rust prevention of steel materials.
【specification】 - Color: gray -Capacity (kg): 0.1 -Operating temperature range (°C): temperature 5°C or higher, humidity 85% or lower
[Specification 2] Heat-resistant temperature (after application and drying): 180 ° C ●Operating temperature range: Temperature 5℃ or higher (Humidity 85% or lower) Zinc content in dry coating film: 96% - Coating area: 0.3 square meters (recommended film thickness 80 μm) ●Drying time: dry to the touch 20 minutes (20℃)
【Note】 ●Stir well before use until you can confirm that there is no sediment at the bottom of the can. ●Be sure to shake the container up and down at least 20 times before use. Please refer to the safety data sheet (SDS) when detailed information is required.
