[Features] Easily repair defects in concrete floors. Since it comes in a tube, it is easy to mix the base agent and hardener, and you can make only the amount you need. The color tone matches the floor top #11 green, so the repaired areas are not noticeable. Formaldehyde emission rating is F☆☆☆☆, NTX specification.
[Applications] For correcting unevenness such as cracks, joints, holes, and dents in existing concrete floor coatings.
【specification】 Color: Green Capacity(g):360 Pot life (25℃): 20 minutes to 40 minutes Curing time (25℃): 2 hours to 4 hours Capacity(kg):0.36 Pot life: 40 minutes at 5°C floor, 30-40 minutes at 10-20°C floor, 20 minutes at 35°C floor Set contents: Base agent 180g + hardener 180g/set
[Specification 2] Pot life: Floor surface at 5℃ (40 minutes), Floor surface at 10-20℃ (30-40 minutes), Floor surface at 35℃ (20 minutes) Walking time: 4 hours (20℃)/12 hours (below 15℃)
[Set contents/accessories] Base agent: 180g Hardener: 180g Spatula x 1 Stirring plate x 1
【Note】 -All ATOMIX FloorTop products can be used as topcoats. However, if you are applying a urethane resin-based topcoat, the surface will need to be sanded. - Take out only the amount of base agent and hardener from the tube that you will use within the pot life. It is a two-liquid reactive type, so the mixing ratio is 1:1 - Mix the base agent and hardener with a putty spatula or similar until the color is uniform.
