BURRTEC knot type (hineri) N foil brush VSB-432

[Features]
Based on the American national standard (ANSI), destructive testing is carried out and the maximum rotation speed is set.
Supports heavy polishing due to high rigidity
Supports Kosoku rotation
Long life
perfect balance
Short delivery time for standard products
RoHS Directive (2011/65/EU), RoHS Directive ((EU)2015/863) Compliant Products

[Use]
burning after welding
Spatter removal after welding
Deburring of gears, etc.
Concrete peeling
Rubber flash, black scale, oxide film removal and rust removal

【specification】
Outer diameter (mm): 102
Wire diameter (mm): 0.5
Thickness (mm): 4.7
Maximum operating speed (rpm): 20000
Thread diameter: M10 (P1.5)

[Specification 2]
Attachable tools: electric angle grinder/straight grinder

[Material/Finish]
-

[Set contents/accessories]
-

【caution】
Please select the machine type and power brush type that match the purpose of use (application). Using a non-compatible model or using it for purposes other than its intended use can lead to accidents and are dangerous. Do not use for purposes other than intended use.
Check the maximum permissible number of revolutions (peripheral speed) printed on packages, labels, catalogs, and other related documents, and use within the permissible range. Never use more than this.
When operating the power brush, be sure to wear a brush protection cover, gloves, safety helmet, dust-proof tight-fitting protective glasses, and a mask for safe work.
In general, burrs, scales, dirt, slag, etc., are scattered with filament (wire rod fragments) with considerable force during the operation of the power brush. In addition, work in clothing that does not expose the skin so that the grinding dust does not come into direct contact with hands and feet.
When wire brush filaments (wire fragments) and grinding powder scatter, it is dangerous, so people around the work (within 15 m from the brush) should also wear protective glasses and protective clothing. (Please install curtains, etc., or instruct people to shut off the area, as a consideration for people in the surrounding area other than the workers.)